Conductor Type: Solid
Thermal Class: 130-220c
Standard: GB,IEC,NEMA,JIS
Insulation Material: Enameled
Model Number: Enameled Wire
Insulation: PEW, PIW, EIW, AIW, EI/AIW
Part 1- Dimensions
Using the guidelines outlined in Part 1 of NEMA 1000 technicians are able to confirm build and AWG, which are useful in determining parameters for further testing.
Dimensions: 1.1 Includes dimensions of bare and film insulated magnet wire; to assist with the determination of build; [single-Heavy-Triple-Quad] and the corresponding wire gauge sizes; the increase in diameter of the bare wire to the various builds due to the film coating applied is used in determining the proof test voltage for some long term projects.
Part 2 Properties and Requirements
A lot of testing requires know the type of magnet wire/winding wire that is being tested, each type of magnet/winding wire listed in the NEMA standard has an outline of requirements that testing must confirm.
Types of Magnet wire / ANSI/ NEMA designations: descriptions of the magnet wire coating insulating material (polyurethane- polyamide- imide, etc…) thermal class assigned, and general requirements.
Part 3 Test Procedures
The guidelines in part 2 outline the test procedures that need to be followed and the testing to be performed for MW confirmation.
Welcome to see the lanpu product, which has kinds of enameled wire.
